Ten Basics in Safety and Health for Newcomers
VideoCode EV-11 15min ￥50.400(NTSC/PAL)
This video explains the ten key rules that newcomers should obey in the workplace. (regular habits, neatness, proper clothing, fire prevention, the handling of hazardous materials, etc.)
（日本語版タイトル　新入者の安全心得　１０ヶ条）
A Safety Guide for New Employees
VideoCode EV-12 20min ￥39,900(NTSC/PAL)
This video shows the basics of safety, including clothing, protective gear, hazard prediction, and safety rules, through an animated look at typical day in the life of a new employee.
（日本語版タイトル　マンガ　新入社員の安全ガイド）
Press Operation Safety for
　　　　Non-Japanese Speaking Workers
VideoCode EV-13 18min ￥28,350(NTSC/PAL)
This video offers clear and practical explanations of the operation and inspection of safety presses.
（日本語版タイトル　プレス作業の安全マニュアル）
Operational Safety of Robots
VideoCode EV-9 16min ￥37.800(NTSC/PAL)
This video gives in-depth explanations of the three key areas for safe robot operation: instructional operations, automatic operation, and inspections and repairs.
（日本語版タイトル　産業用ロボットの安全）
Pinching and Rolling Accidents Can Be Eliminated
〜Working Together to Stamp Out Dangers〜
VideoCode EV-21 18min ￥39,900(NTSC/PAL)
Pinching and rolling accidents are the most common manufacturing mishaps in Japan. They are caused by a variety of factors, including human error. This video shows how equipment and work practices can be adapted to prevent pinching and rolling accidents.
（日本語版タイトル　はさまれ・巻き込まれ　災害はなくせる）
The Secrets of Safety-Introduction
〜Guideline for Creating Fail-Safe
　　　　　　　　 Control Systems for Machine Tools〜
VideoCode EV-19 20min ￥31,500(NTSC/PAL)
Guideline has been developed for the basic concepts for international safety standards. In Japan, the Ministry of Health & Welfare has established guidelines for making equipment fail-safe. This video explains in the detail the concepts for achieving fundamental safety.
（日本語版タイトル　これからの安全技術の決め手　基礎編）
The Secrets of Safety-Technology
〜Guideline for Creating Fail-Safe
　　　　　　　　 Control Systems for Machine Tools〜
VideoCode EV-20 22min ￥31,500(NTSC/PAL)
This video explains the methods for achieving fail-safe operation. It describes the principles of AND gates, unate design, asymmetrical error characteristics, and it shows how presses and other machines can be made fundamentally safe
（日本語版タイトル　これからの安全技術の決め手　技術編）
Back Pain Prevention for Working People
VideoCode EV-17 18min ￥31,500(NTSC/PAL)
This video explains dramatically and clearly the causes and prevention of back pain, including the physiological processes involved in the occurrence of back pain. The video is ideal for educating people in all types of workplaces.
（日本語版タイトル　働く人の腰痛予防）
You Can Eliminate Burns and Chemical Injuries
〜Preventing Accidents Caused
　　　　　　　　by Hot and Harmful Substances〜
VideoCode EV-25 16min ￥39,900(NTSC/PAL)
This video shows hot water, steam, acidic and alkaline chemicals are handled in all types of workplaces. Many accidents caused by contact with hot or harmful substances occur at equipment and machinery connections.You can't handle harmful substances safely unless you have correct knowledge about them. Use the instruction manuals and material safety data sheets to learn about the substances you handle.
（日本語版タイトル　熱傷・薬傷災害はなくせる）
Watch Out for These Hazards on Your Job!
〜Hazard Predictions in Delivery
　　　　　　　　 and Meter Reading Work〜
VideoCode EV-26 15min ￥40,950(NTSC/PAL)
Delivery people and meter readers often have accidents. If we examine the accidents, we can see that there are seven main types of hazards aside from traffic accidents, this video explains. These hazards are grouped into fifteen patterns. By studying them repeatedly, you will be able to concentrate better, and you will prevent almost all accidents.
（日本語版タイトル　あなたの仕事にこんな危険が！）
Hazard Prediction Programs
〜Eliminating Accidents Caused by Human Error〜
VideoCode EV-18 18min ￥48,300(NTSC/PAL)
Using realistic examples, this video shows why people sometimes stop paying attention. It gives a comprehensive explanation of how equipment and systems can be modified to prevent accidents caused by decreased attention.
（日本語版タイトル　危険予知活動のめざすもの）
Are You Pointing and Calling?
Part1. Why You Should Point and Call
〜Preventing Accidents Caused by Human Error〜
VideoCode EV-22 15min ￥45,150(NTSC/PAL)
This video explains pointing and calling is a method for confirming that work will proceed safely and without mistakes. You do pointing and calling during your work at key points where you face hazards or you can easily make a mistake.
（日本語版タイトル　やっていますか指差呼称/第1巻　指差呼称のめざすもの）
Are You Pointing and Calling?
Part2. How to Point and Call
〜Basic Concepts and Applications〜
VideoCode EV-23 15min ￥45,150(NTSC/PAL)
Hazard prediction programs make people more sensitive to dangers that exist. Pointing and calling is necessary to make workers concentrate harder at key points in the work process. This video shows the basic technique for pointing and calling.
（日本語版タイトル　やっていますか指差呼称/第２巻　指差呼称の実践方法）
Are You Pointing and Calling?
Part3. How to Encourage Pointing and Calling
〜Overcoming Workers' and Embarrassment〜
VideoCode EV-24 15min ￥45,150(NTSC/PAL)
Many workers say that pointing and calling is embarrassing or too trouble.This video offers five methods for encouraging pointing and calling have three main components: the attitude of the top management must be clear,the on-site managers and foremen should make safety and hygiene an integral part of work,all of the workers should discuss matters frankly and pay attention to each other.
（日本語版タイトル　やっていますか指差呼称/第３巻　指差呼称の推進方法）
「What are the Potential Hazards?」In-depth Training
〜KYT Basic 4-Round Method Procedure〜
VideoCode EV-27 27min ￥39,900(NTSC/PAL)
The introduction explains "The Aim of KYT" as to how KYT enhances the sensitivity to hazards, and further explains in detail the procedure of the specially important first round. Then, in the implementation section, supposing the training session in the workplace, it explains in an easy style the whole process of the 4-round method. The introduction and implementation sections in one volume.
（日本語版タイトル　｢どんな危険がひそんでいるか｣徹底訓練）
One-Point KYT Procedure
VideoCode EV-28 8min ￥31,500(NTSC/PAL)
It explains in an easy style the procedure of a hazard prediction activity adapted to the real-life situations in the workplace done by small teams of 2 to 3 people orally in a short time in such a method as to drastically narrow down Round 2 and Round 4 of the 4-round KYT to only one point.
（日本語版タイトル　ワンポイントＫＹＴの進め方）
Operational Direction STK Training Procedure
VideoCode EV-29 7min ￥31,500(NTSC/PAL)
This training is for a case in which the managers and supervisors (persons to direct work) do not accompany the team to the site and aims to enhance their ability to direct work. Specially, in times of non-recurring work, they orally provide "pertinent operational orders and directions including hazard prediction" and at the same time have the workers report on their return from work and thank them for their work. It is a KYT to promote the leadership ability of operations supervisors.
（日本語版タイトル　作業指示STK訓練の進め方）
A Seguranca no Trabalho com a Prensa
VideoCode EV-14 18min ￥28,350(NTSC/PAL)
Portuguese version of EV-13.This video offers clear and practical explanations of the operation and inspection of safety presses.
（EV-13のポルトガル語版）